How do you use a seed planter? Once you’ve decided what kind of seed planter you want, the next thing to figure out is how to make your planter, or planter kit, from scratch. If you’ve got a garden and are looking for ways to beautify your home or backyard, planting your own seeds is an easy way to create interesting, colorful arrangements that can be enjoyed by all in your family.
However, you need to make sure that the way you choose to make your planter, or planter kit, will suit your personal style. While a free-standing planter will add a little flair to your garden, a container planter will look more formal, making it a better choice for a backyard meal. Plus, both styles have their advantages. If you choose to build a planter from scratch, your choices are extensive.
Seed Planter Is Non-Commercial And Cheap
A standard, non-commercial seed planter is easy to make at home, and you can save money on your purchase if you start small, so you can make lots of planters. What makes this task easier is that you can use pre-made, prepackaged kits, as well as basic equipment like a garden fork and spade, and a simple plotter.
Here’s how to make a seed planter, using pre-packaged supplies. Not only are you saving money, but you can find easy step-by-step instructions, so your children can also save time.
The first step is to gather up your tools, including a bunch of fresh soil, shovel, spade, rake, water, salt, and seed. You can prepare the soil and water your plants by digging a hole about three feet deep, then lay the dirt in the hole, to ensure that the soil stays moist, but not soaked through. Cut the grass to the length you need to seed it. Set the sod out of the way, and then dig out a circular border around it. Use a spade to remove the top layer of grass, which you should divide up into equal parts.
Thoroughly dig out the soil, leaving about a half-inch of soil above the grass. Place the grass and seed in the prepared hole, using a spade to get rid of any weeds. You should have at least four inches of soil. If you’re not sure how much to put in the planter, leave an inch of space between the grass and the seed.
Steps To Make the Soil And Insert The Seeds By Seed Planter
When you’ve finished preparing the soil and grass, prepare your tools, and then proceed to make a seed planter. You’ll need a shovel, spade, a hole puncher, a standard potting bench, a bucket, and a bucket brush.
Once you’ve made sure you have a straight line and adequate depth of soil, dig down to the desired depth, using a spade. Then place the spade against the soil, so that it rests on the soil and the sod where the grass was cut off. If there are any weeds sticking out, you’ll need to pull them up.
With your spade, place a couple of cut pieces of sod on the spade, ensuring that they’re even. Then lay down the second row of sod in the same manner, so that you end up with four rows of sod. Set a single row of sod about a foot away from the first row, and then firmly tap each sod to settle it.
Place the spade in the hole puncher, and then position the garden fork at an angle so that it’s placed in the center of the planter. Carefully tap the spade into the planter, and then with the garden fork, push the sod out. Then, using the bucket brush, spread the sod evenly along the edges, and then lightly paint the edges with a diluted bleach solution. You don’t need to be too exact about this step; it’s easy to make a mistake and ruin your planter!
Once you’ve finished painting, sprinkle some bleach over the entire planter, allowing the bleach to fully dry before covering with your soil. If the planter is going to be left outside, put the planter inside of your home for about three days to let the bleach completely dry. before reseeding it.